Face puttying is a technique used in commercial construction projects in Australia to create a smooth and uniform finish on the surface of plasterboard walls and ceilings. It involves applying a layer of putty or joint compound to the joints and seams between the plasterboard sheets, as well as any imperfections or rough spots on the surface.

The process of face puttying typically involves the following steps:

1. Preparation: The surface of the plasterboard is cleaned and any loose debris or dust is removed.

2. Application of joint compound: A layer of joint compound is applied to the joints and seams between the plasterboard sheets using a putty knife or trowel. This helps to fill in any gaps or imperfections and create a smooth surface.

3. Smoothing: The joint compound is then smoothed out using a putty knife or trowel to create a uniform and level finish.

4. Drying: The joint compound is allowed to dry, which may take several hours or overnight depending on the product used.

5. Sanding: Once the joint compound is dry, it is sanded smooth using fine-grit sandpaper to create a smooth and uniform finish.

6. Painting or finishing: The surface is then ready to be painted or finished with a suitable coating, such as wallpaper or tile.

Face puttying is an important step in the construction process as it helps to create a smooth and uniform finish on the surface of plasterboard walls and ceilings. This not only improves the appearance of the finished project but also helps to protect the surface from damage and wear over time. Additionally, face puttying can help to reduce the amount of dust and debris that can accumulate on the surface, making it easier to clean and maintain.